Torben at 15:20, 23 October 2012

2012-10-23T15:20:58Z

New page

[[Category: Latex]]

This header is outdated, better check out my [http://www.entorb.net/docs/TorbensLatexVorlage.zip template].

% by Torben Menke (http://www.entorb.net)
% Version 2009-09-02
% loads needed packages
% defines basic settings

% Test for correct encoding: äöüß
===Documentclass===
\documentclass[ % Koma: scrartcl, srcreprt, srcbook, scrlttr2
a4paper
%,draft % draft/final
,12pt % 10pt, 11pt, 12pt
,twoside % one/two: different layout for left/right pages
,onecolumn % one/two
,fleqn % equations aligned left
,ngerman %
,titlepage % titlepage / notitlepage = title on a page of its own
,liststotoc %or ...numbered % list of figures + -tables to table of contents
,bibtotoc % Lit Verz -> TOC
,abstracton % writs the word abstract above the abstract
%,noonelinecaption % table + figure captions of only one line are not treated different
% to multiline-ones
,bigheadings % big-,normal-, smallheadings: sets size of section-headings, std=big
,openany % openright : new chapters only on right pages, openany: do not care
% only for scrreprt and scrbook, not scrartcl
]{scrreprt}

% put subsubsections in toc
\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}

\usepackage[ngerman]{babel} % Languagesettings
% ngerman for new German spelling
%\usepackage[latin1]{inputenc} % Umlaute (Windows)
\usepackage[utf8]{inputenc} % Umlaute (Linux)
\usepackage[T1]{fontenc} % Worttrennung von Worten mit Umlauten möglich

===Layout===
\usepackage{geometry} % Pagesettings
% printversion: left=4cm
\geometry{left=3cm,textwidth=15cm,top=3cm,textheight=23.5cm}
% A4: 21cm x 29.7cm
% 15cm = 425.2 pt
% 23.5cm = 666.14 pt
\usepackage[automark]{scrpage2} % KOMA layout paket, automark is important!
\pagestyle{scrheadings}
\ohead[\pagemark{}]{\pagemark{}}
%\ohead[]{\pagemark{}}
\chead[]{}
%\ihead[]{\textsc{\headmark}}
\ihead[]{\textbf{\headmark}}
%\cfoot[Torbens Diplomarbeit, Stand: \today]{Torbens Diplomarbeit, Stand: \today}
%\cfoot[--- \pagemark{} ---]{--- \pagemark{} ---}
\ofoot[]{}
\ifoot[]{}
\setheadtopline{}
\setheadsepline{0.4pt}
\setfootsepline{}
\setfootbotline{}

====Font-Settings====
[http://www.linupedia.org/opensuse/LaTeX_fuer_Fortgeschrittene#Schriften] [http://tex.loria.fr/general/new/fntguide.html#Sec:text]
%% Palatino
%% \usepackage{palatino} is replaced by this (see l2tabu)
%\usepackage{mathpazo} % MathFont Palatino
%\usepackage[scaled=.95]{helvet}
%\usepackage{courier}
%% dirty solution to make headings use the text-font
%\renewcommand{\sffamily}{\normalfont}

%% Times
% \usepackage{times} is replaces by
%\usepackage{mathptmx}
%\usepackage[scaled=.90]{helvet}
%\usepackage{courier}

%% Computer Modern Roman
%\begin{document}
%\fontfamily{cmr} \selectfont

% Gothic or OldGerman or Schwabenbacher
% \usepackage{yfonts}
& \swabfamily or \gothfamily or \frakfamily or \initfamily

===Math===
[ftp://ftp.ams.org/pub/tex/doc/amsmath/short-math-guide.pdf American Mathematical Society Guide]
\usepackage{amssymb}
\usepackage[reqno]{amsmath} % reqno: equation numbers right hand side of the eq
%\usepackage{amsfonts} % Math fonts?

===Tables===
\usepackage{array} % nicer \hlines
% new column-align types in tabulars, similar to p{width}:
% m(iddle), b(ottom)

%\usepackage{longtable} % support for tables that are longer than one page and allows rotating together with package rotating
%\usepackage{rotating}
%\begin{sidewaystable}
% \centering
% \begin{longtable}{|lll|}
% table body
% \end{longtable}
%\end{sidewaystable}

% Join / merge cells:
% columns: no package needed \multicolumn{#cols}{c}{centered Multicolumn}
% rows (Zeilen):
\usepackage{multirow} % merges a number of rows and centers text
% use: \multirow{#rows}{width}{text}

% align table column by comma:
%\usepackage{dcolumn} % use D{inputsep}{outputsep}{#digits}
% to use the comma as seperator for in+output
% \newcolumntype{d}[1]{D{,}{\mathcomma}{#1}}
% to use the dot as seperator for in+output
%\newcolumntype{d}[1]{D{.}{.}{#1}}
% \begin{tabular}{rd{2}l}

% Round Numbers and align at the comma.
%\usepackage{rccol} % use: R{#digits before Komma}{#digits after comma}
% R{3}{2}
%\usepackage{fltpoint} % requirement for rccol

===Graphics===
% graphicx is loaded in the pdf section
%\usepackage{graphicx} % use: \includegraphics{filename} (without fileextension)
% for dvi/ps latex the images have to be .eps or .ps
% for pdflatex the images have to be .jpg, .png, .gif, .pdf, .bmp
% work around: save 2 copys of the image: e.g. one .eps and one .jpg
%\usepackage{rotating} % Rotate images
%\usepackage{subfigure} % figure inside figure
\usepackage[outercaption] {sidecap} % Caption besides the figure
%\usepackage{wrapfig} % Wrap text around figures or tables
\graphicspath{{./fig/}{.}} % where to look for image-files

===PDF===
\ifpdfoutput{ %ifpdfoutput comes with Koma
\usepackage[pdftex]{graphicx}
% \usepackage{epstopdf}
% \newcommand{\inputfig}[1]{\input{#1.pstex_t}}
% \DeclareGraphicsExtensions{.ps,.pstex,.eps,.pdf}
%% convertes eps files to pdf ones on the fly, using epstopdf (miktex)
%% use: pdflatex --enable-write18 FILENAME !!!!!!!!!!!!!
% \DeclareGraphicsRule{.pstex}{pdf}{.pdf}{`epstopdf #1}
% \DeclareGraphicsRule{.ps}{pdf}{.pdf}{`epstopdf #1}
% \DeclareGraphicsRule{.eps}{pdf}{.pdf}{`epstopdf #1}
\usepackage[
pdftex, % hypertex (default), pdftex
final, % final, draft, debug -> more text in log file
pdfauthor={\Verfasser},
pdftitle={\Titel},
pdfsubject={Diplomarbeit},
% pdfstartview={Fit},
a4paper=true,
bookmarks=true,
bookmarksopen=true,
bookmarksopenlevel=1,
bookmarksnumbered=true,
% plainpages=false,
% pdfpagelabels=true,
% colorlinks=false,
% pdfborder={0 0 0}, % no colorful frames around links
% unicode, % Unicode encoded pdf strings
linkcolor=black, citecolor=black, filecolor=black, pagecolor=black, urlcolor=black
]{hyperref}

% \pdfinfo {
% /CreationDate (D:20060901010000) % this is the format used by pdf for date/time:YYYYMMDDhhmmss
% /ModDate (D:20060901020000)
% }
%\pdfcompresslevel=9
% \texorpdfstring helps generations formulas, that can be used as pdf _bookmark_ titles:
% \section{Die \texorpdfstring{$e^x$~}{Exponential-}Funktion}
}{ % if dvi/ps output
\usepackage[dvips]{graphicx}
\usepackage[dvips]{hyperref}
%\usepackage{epsfig}
%\newcommand{\inputfig}[1]{\input{#1.pstex_t}}
%\DeclareGraphicsExtensions{.pstex,.eps}
}

This warning
PDF inclusion: found PDF version <1.5>, but at most version <1.4> allowed
can be removed by placing
\pdfminorversion=5
above the \documentclass{...}. (Maybe later works as well, not tried)

===Misc===
%\usepackage{textcomp} % Additional Symbols
%\usepackage{ifsym} % Additional Symbols
%\usepackage{wasysym} % Additional Symbols
%\usepackage{stmaryrd} % Additional Symbols
\usepackage{pxfonts} % Additional Symbols
% pxfonts for font palatino / txfonts for times

\usepackage[squaren,textstyle]{SIunits} %
% adds support for SI units like \ampere, \ohm
% defines \unit{}{}, % \unit{10}{\centi\meter}
% textstyle for using the same font, than the surrounding text
% if textstyle is used, only buildin units should be used: cm->\centi\meter
% squaren for problems with amssyb package

%\usepackage{slemph} % \emph{} writes text now in \textsl instead of \textit

\usepackage{float} % adds placement rule H for floats -> exactly HERE

\usepackage{placeins}
% defines the command \FloatBarrier: the name is program
% [section] : floats are not allowed to travel into another section

% makes Problems with pdflatex !!!
%\usepackage{varioref} % \vref{eqn:dreieck} = x on page y

\usepackage{color} % Support for colors :\textcolor{red}{Red Text}
\usepackage{url} % www-links etc. \url{www.google.de}
\usepackage{upgreek} % Upright greek letters: \uppi, \upalpha...
\usepackage{xspace} % \xspace can be used in newcommands without parameters to ensure whitespace after it

====Line-Numbering====
%\usepackage[right,modulo]{lineno} % Adds line-numbering, modulo every 5th
% redifine \section -> section \linenumbers*
% '*' stands for a reset of the number
% PROBLEMS WITH \listoffigures and \listoftables !!!!!!!!
%\let\sectionorg\section
%\renewcommand\section[2][]{%
% \def\tempOPT{#1}%
% \ifx\tempOPT\empty\sectionorg{#2}
% \else\sectionorg[#1]{#2}\fi\linenumbers*}
%\let\subsectionorg\subsection
%\renewcommand\subsection[2][]{%
% \def\tempOPT{#1}%
% \ifx\tempOPT\empty\subsectionorg{#2}
% \else\subsectionorg[#1]{#2}\fi\linenumbers*}

====Nomenclature====
\usepackage[
german
%,intoc % put in table of contents
]{nomencl}
\let\abbrev\nomenclature
\renewcommand{\nomname}{Abkürzungsverzeichnis}
\setlength{\nomlabelwidth}{.15\hsize} % distance label-text
\setlength{\nomitemsep}{-\parsep} % no spacing between lines
%\renewcommand{\nomlabel}[1]{#1 \dotfill}
%\setlength{\nomitemsep}{-\parsep}
\makenomenclature

====Index List====
\usepackage{makeidx} % support for creation of index list
\makeindex
% use '\index{Moinsen} Moinsen' in the document
% \printindex %prints the index list here
% Attention: to create the index you may have to run the following command by hand:
% makeindex FILENAME_OF_THE_LATEX_FILE

===BibTeX===
\usepackage[square]{natbib} % needed by plainnat + dinat Bib Styls, square -> [] instead of ()
\bibliographystyle{amsplain}
%\bibliographystyle{plainnat}
%\bibliographystyle{abbrvnat}
%\bibliographystyle{abbrvnat}
%\bibliographystyle{unsrtnat}
%\bibliographystyle{./dinatTM} % located in my folder
%\bibliographystyle{alphadin}
%\bibliographystyle{jureco}

%\renewcommand{\cite}{\citep}

===Definitions===
% Seperate paragraphs by an empty line instead of intending the line
\setlength{\parskip}{2ex plus0.5ex minus0.3ex}
\setlength{\parindent}{0pt}

% from l2tabu.pdf (Latex Sündenregister), page 6
\tolerance 1414
\hbadness 1414
\emergencystretch 1.5em
\hfuzz 0.3pt
\widowpenalty=10000
\vfuzz \hfuzz
\raggedbottom

% penalty for words split on two lines
\hyphenpenalty=500
%\tolerance 9000 % Less Bad-Box-Warnings, less too long lines !!!
%\exhyphenpenalty=5000 % Removes Problems with words containing "-" a la E-Lock

%\numberwithin{equation}{section} % Sectionnummer in x
%\numberwithin{figure}{section}
%\numberwithin{table}{section}

% layout of Captions in Tables and Figures (Bildunterschriften)
\setkomafont{captionlabel}{\bfseries} % Font of the Label 'Figure' etc
\setkomafont{caption}{\small} % Font of the Caption \itshape
\setcapindent{0em} % decrease intention of following lines
% \setcapwidth[c]{0.75\textwidth} % not here, for it makes problems with package sidecap!

%% dictum = Zitate
%\renewcommand*{\dictumwidth}{.3\textwidth}

====Hyphenation (Worttrennung)====
\hyphenation{
Scheiß-haus
Ins-ti-tut
Sig-nal
}

===my own commands===
% Syntax:
% \newcommand{\myCommand} [ N ] [ STD ] { DEFINITION }
% N = num of arguments
% STD -> Arg 1 is optional, if missing its value is STD

% I want to have a German and an English Abstract, so I duplicated the environment
\newenvironment{abstractEN}{%
\renewcommand*{\abstractname}{Abstract} \abstract}{%
\endabstract
}

\newcounter{todos} \setcounter{todos}{0}
\newcommand{\todo}[1]{%
\emph{\textcolor{red}{TODO: #1}}%
\addtocounter{todos}{1}%
}
\newcommand{\wort}[1]{%
\emph{\textcolor{blue}{WORT: #1}}%
}

% \footnotetextref{Text über Drop Coating}{text:dropcoating}

\newcommand{\footnotetextref}[1]{% do not insert spaces!!!
\footnote{vgl. Seite \pageref{#1}}%
}
\newcommand{\engl}[1]{% do not insert spaces!!!
(\emph{engl.:~#1})%
}
%\footnote???
\newcommand{\enTOde}[1]{% do not insert spaces!!!
(\emph{engl.~für~#1})%
}

\newcommand{\usd}[0]{\ensuremath{U_\text{SD}}\xspace}
\newcommand{\mW} [1]{\unit{#1}{\milli\watt}}
\newcommand{\uW} [1]{\unit{#1}{\micro\watt}}
\newcommand{\eV} [1]{\unit{#1}{\electronvolt}}
\newcommand{\meV} [1]{\unit{#1}{\milli\electronvolt}}
\newcommand{\nm} [1]{\unit{#1}{\nano\meter}}
\newcommand{\um} [1]{\unit{#1}{\micro\meter}}
\newcommand{\mm} [1]{\unit{#1}{\milli\meter}}
\newcommand{\temp}[1]{\unit{#1}{\kelvin}}
\newcommand{\sek} [1]{\unit{#1}{\second}}
\newcommand{\grad}[1]{\unit{#1}{\degree}}

\newcommand{\symkreis} {\ensuremath{\medcirc}} % needs package pxfonts or txfonts
\newcommand{\symdreieck}{\ensuremath{\triangle}}
\newcommand{\symquadrat}{\ensuremath{\square}}
\newcommand{\entspricht}{\ensuremath{\mathrel{\hat{=}}}}
% \widehat = doof
% \mathrel = corrects spacings
\newcommand{\nmVerdi}{\nm{532}~(\entspricht\eV{2.33})}
\newcommand{\nmHeNe}{\nm{633}~(\entspricht\eV{1.96})}
\newcommand{\tInt}{\ensuremath{t_\text{int}}}

% centered figure
\newcommand{\cBild}[5][tb]{%
\begin{figure}[#1]%
\centering%
\includegraphics[width=#3]{fig/#2}%
%\setcapwidth[c]{0.9\textwidth}%
\caption[#4]{#5}% \caption[shortcaption]{caption}
\label{fig:#2}%
\end{figure}%
}

% Caption besides the figure
\newcommand{\scBild}[5][tb]{% sidecap
\begin{SCfigure}[][#1]%
\includegraphics[width=#3]{fig/#2}%
\caption[#4]{#5}% \caption[shortcaption]{caption}
\label{fig:#2}%
\end{SCfigure}%
}

% param1=placement htbp (optional)
% param2=filename (without extension, must be located in folder fig/)
% Label: \label{fig:#2}
% param3=width (5cm or 0.5\textwidth etc)
% param4=shortcaption
% param5=caption

%example:
%\cBild[htbp]{img_setup}{0.5\textwidth}{short caption for list of figures}{caption}
%\scBild[htbp]{img_setup}{6cm}{short caption for list of figures}{caption}

\newcommand{\TabBild}[5][tb]{
\begin{figure}[#1]
\centering
\renewcommand{\arraystretch}{0} % removes rowspacing
\begin{tabular}{c@{}c}% @{} removes the columnspacing
#5%
\end{tabular}
\setcapwidth[c]{.9\textwidth}% usefull?
\caption[#3]{#4}% \caption[shortcaption]{caption}
\label{fig:#2}
\end{figure}
}
% param5 :
%\includegraphics{fig/NN-pol-N5p}%
%\includegraphics{fig/NN-pol-N6p}\\%
%\includegraphics{fig/NN-pol-N5s}%
%\includegraphics{fig/NN-pol-N6s}\\%

\newcommand{\pBild}[3]{
\begin{figure}[p]
\centering
\includegraphics{fig/#1}% the '%' is important!!! , removed width [width=#3]
\setcapwidth[c]{0.9\textwidth}% usefull?
\caption[#2]{#3}% \caption[shortcaption]{caption}
\label{fig:#1}
\end{figure}
}

\newcommand{\cTabelle}[6][htbp]{
\begin{table}[#1]
\centering
%\vspace{3mm}
\begin{tabular}{#5}
#6
\end{tabular}
\setcapwidth[c]{0.9\textwidth}% usefull?
\caption[#3]{#4}% caption above table???
\label{tab:#2}
\end{table}
}

\newcommand{\scTabelle}[6][htbp]{
\begin{SCtable}[][#1]
\centering
\caption[#3]{#4}
\label{tab:#2}
%\vspace{3mm}
\begin{tabular}{#5}
#6
\end{tabular}
\end{SCtable}
}
% usage:
% \cTabelle{htbp}{shortcaption}{caption}{label}{lr}
% {
% nicht & viel\\
% }

% print the number of the last equation
% \lasteqn[n] -> (n+1)th last; (n = optional)
\newcommand{\lasteqn}[1][0]{
(\arabic{section}.\addtocounter{equation}{-#1}\arabic{equation}\addtocounter{equation}{#1})
}
% print the number of the next equation
% \nexteqn[n] -> last + n (n = optional)
\newcommand{\nexteqn}[1][1]{
(\arabic{section}.\addtocounter{equation}{#1}\arabic{equation}\addtocounter{equation}{-#1})
}

Latex - Header - Revision history

Torben at 15:20, 23 October 2012